Lighting

Model:
ZDP100 (V2.0)

Descrition:
Provides wireless dimming of lights 300 watt max Incandescent Only

• Includes a 3 prong pass through outlet.
• Lamp outlet is 2 prong.
• Supports load sensing. If the attached lamp is turned on
  manually, the module will detect the load change and turn itself
  on. This allows lamps to operated manually or through
  automation.
• Programmable ramp rates. Supports different ramp rates when
  controlled locally, or remotely. ON/OFF control of lights
  connected to the Plug-In Lamp Module.
• Plugs directly into wall outlet and provides a switched 120
  VAC source.
• Each Plug-In Lamp Module functions as automatic repeater to
  other HomePro Modules to ensure full home coverage.
• Signal (Frequency): 908.42 MHz
• Range: Up to 100 feet line of sight between the Wireless
  Controller and /or the closest HomePro Module

Model:
ZTW103

Descrition:
From its installed location, ZTW103 Transmitter provides remote RF wireless or manual ON/OFF and dimming control of any Z-Wave switch, dimmer, shade or window covering controller.
Can add 3-way capability
Each ZTW103 Transmitter functions as an automatic repeater to other HomePro Modules to ensure full home coverage of the RF signal
The ZTW103 can be "associated" with up to 20 other Z-wave devices
Supports up to two auxiliary switches

Model:
ZDP100 (V3.0)

Description:
Rated 300W, 120 VAC. A Wireless Controller provides control of the Plugin Lamp Modules and the lighting in a home, and can easily be installed by the homeowner. A button on the Plug -in Lamp Module identifies it to the Wireless Controller when pushed. It also can turn the connected load on and off.

Lamps can be dimmed, turned on and off, in groups or individually from the Controller.

Model:
ZDW100

Description:
This Wall Mounted Dimmer can be easily be installed by the homeowner. It can directly control the on/off or dim and brighten any connected incandescent lighting by pressing and holding.

It can also be controlled from a HomePro wireless Remote Controller. Pushing the top or bottom of the paddle switch identifies it to the wireless Controller. Lamps can then be dimmed, turned on and off in groups, or individually, from the Wireless Controller.

Model:
ZDW103

Description:
Pushing one of six buttons on the Wireless Controller can select predetermined “scenes" programmed by the homeowner at each Wall Mounted Dimmer Switch or other wireless module.

HomePro products utilize radio frequency (RF) Z-Wave™ technology to communicate and inter-operate, and are compatible with other Z-Wave™ enabled RF products. See specifications of the Wireless Controller for details.

Features
Provides ON/OFF, BRIGHT/DIM with wireless RF, or manually, of any light or lamp connected.
Replaces current wall switch.
Each ZDW120 Wall Mounted Switch functions as an automatic repeater to other HomePro Modules to ensure full home coverage of the RF signal.

Model:
ZDW120 V1.1

Description:
Pushing one of six buttons on the Wireless Controller can select predetermined “scenes" programmed by the homeowner at each Wall Mounted Dimmer Switch or other wireless module.

HomePro products utilize radio frequency (RF) Z-Wave™ technology to communicate and inter-operate, and are compatible with other Z-Wave™ enabled RF products. See specifications of the Wireless Controller for details.

Features
Provides ON/OFF, BRIGHT/DIM with wireless RF, or manually, of any light or lamp connected.
Replaces current wall switch.
Each ZDW120 Wall Mounted Switch functions as an automatic repeater to other HomePro Modules to ensure full home coverage of the RF signal.

Model:
ZTW100

Description:
The ZTW100 Wall Mounted Transmitter is a component of the HomePro lighting control system. Install the ZTW100 Wall Mounted Transmitter like a standard wall switch and program it from a Controller to operate loads. Inclusion of this Wall Mounted Transmitter on a Controller menu allows programming of the ZTW100 to provide remote control of ON/OFF and DIM/BRIGHT of lamps connected to Z-Wave devices (or nodes).

Model:
RF9517

Description:
Accessory Switch (RF9517) replaces regular switches or dimmers to provide local and remote ON/OFF control. The device also provides 3-way, multi-location or virtual 3-way remote ON/OFF control of a selected RF switch without the need for traditional 3-way wiring. Each switch can be manually controlled and remotely controlled by commands sent from an ASPIRE RF controller or other Z-Wave compatible controllers or programs. ASPIRE RF switches utilize existing 120 V/AC 60Hz standard house wiring and fit in standard wallboxes. No new wiring is required.

(Remote Switch generic, support Binary Switch)

Model:
RF9500

Description:
The Aspire RF™ Battery Operated Switch/Dimmer controls RF receptacles, switches or dimmers to provide remote ON/OFF/DIM/BRIGHT control and provides other programmable functions (association, child lockout, etc.) when used with ASPIRE RF or other Z-Wave® compliant products. The Aspire RF Battery Operated

Switch/Dimmer utilizes two CR2025 batteries and mounts flush to the wall. No wiring is required.

Model:
RF9501

Description:
The ASPIRE RF™ 15A switch (RF9501) replaces regular switches or dimmers (where a neutral is present) to provide local and remote ON/OFF control for Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage and Fluorescent lighting loads. Each switch can be manually controlled and remotely controlled by commands sent from an ASPIRE RF controller or other Z-Wave compatible controllers or programs. An ASPIRE RF switch utilizes existing 120 V/AC 60Hz standard house wiring and fits in a standard wallbox. No new wiring is needed.

Model:
RF9505

Description:
An Aspire RF TR receptacle version complies with 2008 NEC® section 406.11 specification that states all receptacles installed in dwelling units must be tamper resistant. The Aspire RF™ 15A Split Receptacle replaces regular receptacles and provides local and remote wireless ON/OFF control of a single outlet. Receptacle can be manually controlled and remotely controlled by commands sent from an ASPIRE RF controller (RFHDCSG, RFTDCSG) or other Z-Wave compatible controllers or programs. An ASPIRE RF receptacle utilizes existing 120 V/AC 60Hz standard house wiring and fits in a standard wallbox. No new wiring is required.

Product:
Cooper Wiring Devices 15A Split Control Tamper Resistant Duplex Receptacle

Model:
RF9505T

Description:
An Aspire RF TR receptacle version complies with 2008 NEC® section 406.11 specification that states all receptacles installed in dwelling units must be tamper resistant. The Aspire RF™ 15A Split Receptacle replaces regular receptacles and provides local and remote wireless ON/OFF control of a single outlet. Receptacle can be manually controlled and remotely controlled by commands sent from an ASPIRE RF controller (RFHDCSG, RFTDCSG) or other Z-Wave compatible controllers or programs. An ASPIRE RF receptacle utilizes existing 120 V/AC 60Hz standard house wiring and fits in a standard wallbox. No new wiring is required.

Model:
RF9518

Description:
The ASPIRE RF™ 8A switch (RF9518) replaces regular switches or dimmers to provide local and remote ON/OFF control for incandescent loads. Each switch can be manually controlled and remotely controlled by commands sent from an ASPIRE RF controller or other Z-Wave compatible controllers or programs. An ASPIRE RF switch utilizes existing 120 V/AC 60Hz standard house wiring and fits in a standard wallbox. No new wiring is needed.

Model:
RF9534

Description:
Aspire RF™ Dimmers replace regular switches to provide local and remote ON/OFF/DIM/BRIGHT control and are compatible with Incandescent, Magnetic Low-Voltage and Electronic Low-Voltage lighting loads. Aspire RF Dimmers provide other programmable functions (scenes, events, association, child lockout, etc.) when used with Aspire RF or other Z-Wave® compliant controllers*. Each dimmer can be manually and remotely controlled by commands sent from an Aspire RF controller (RFTDCSG, RFHDCSG, RFBER) or other Z-Wave compatible controllers or programs. Aspire RF Dimmers utilize existing 120 V/AC 60Hz standard house wiring and fit into standard wallboxes. No new wiring needed.
*(Note: some specific Aspire RF features may not be programmable)

Model:
RF9535-N

Description:
Aspire RF™ Dimmers replace regular switches to provide local and remote ON/OFF/DIM/BRIGHT control and are compatible with Incandescent, Magnetic Low-Voltage and Electronic Low-Voltage lighting loads. Aspire RF Dimmers provide other programmable functions (scenes, events, association, child lockout, etc.) when used with Aspire RF or other Z-Wave® compliant controllers*. Each dimmer can be manually and remotely controlled by commands sent from an Aspire RF controller (RFTDCSG, RFHDCSG, RFBER) or other Z-Wave compatible controllers or programs. Aspire RF Dimmers utilize existing 120 V/AC 60Hz standard house wiring and fit into standard wallboxes. No new wiring needed.

Model:
RF9536

Description:
Aspire RF™ Dimmers replace regular switches or dimmers to provide local and remote ON/OFF/DIM/BRIGHT control and are compatible with incandescent lighting loads. Aspire RF Dimmers provide other programmable functions (scenes, events, association, child lockout, etc.) when used with Aspire RF or other Z-Wave® compliant controllers*. Each dimmer can be manually controlled and remotely controlled by commands sent from an Aspire RF controller (RFHDCSG, RFTDCSG, RFBER) or other Z-Wave compatible controllers or programs. No neutral is required.

Model:
RF9536-N

Description:
Aspire RF™ Dimmers replace regular switches to provide local and remote ON/OFF/DIM/BRIGHT control and are compatible with Incandescent, Magnetic Low-Voltage and Electronic Low-Voltage lighting loads. Aspire RF Dimmers provide other programmable functions (scenes, events, association, child lockout, etc.) when used with Aspire RF or other Z-Wave® compliant controllers*. Each dimmer can be manually and remotely controlled by commands sent from an Aspire RF controller (RFTDCSG, RFHDCSG, RFBER) or other Z-Wave compatible controllers or programs. Aspire RF Dimmers utilize existing 120 V/AC 60Hz standard house wiring and fit into standard wallboxes. No new wiring needed.

Model:
RF9537-N

Description:
Aspire RF™ Dimmers replace regular switches to provide local and remote ON/OFF/DIM/BRIGHT control and are compatible with Incandescent, Magnetic Low-Voltage and Electronic Low-Voltage lighting loads. Aspire RF Dimmers provide other programmable functions (scenes, events, association, child lockout, etc.) when used with Aspire RF or other Z-Wave® compliant controllers*. Each dimmer can be manually and remotely controlled by commands sent from an Aspire RF controller (RFTDCSG, RFHDCSG, RFBER) or other Z-Wave compatible controllers or programs. Aspire RF Dimmers utilize existing 120 V/AC 60Hz standard house wiring and fit into standard wallboxes. No new wiring needed.

Model:
RF9542-Z

Description:
Aspire RF™ Accessory Dimmers replace regular switches ordimmers to provide local and remote ON/OFF/DIM/BRIGHT control. The device also provides multi-location control or virtual 3-way remote ON/OFF/DIM/BRIGHT control without the need for traditional 3-way wiring or a dedicated traveler wire. Aspire RF Accessory Dimmers provide other programmable functions (scenes, events, association, child lockout, etc.) when used with Aspire RF or other Z-Wave® compliant controller*. Each dimmer can be manually controlled and remotely controlled by commands sent from an Aspire RF controller (RFHDCSG, RFTDCSG, RFBER) or other Z-Wave compatible controllers or programs. Aspire RF Dimmers utilize existing 120V/AC 60Hz standard house wiring and fit in standard wallboxes. No new wiring is needed.

Model:
RFAPM

Description:
Aspire RF Wireless Plug-In Module 15A, 120V/AC grounding receptacle for use with a wide variety of lamps and appliances. Module can be controlled remotely by other RF devices through association of up to 5 devices.

Product:
Cooper Wiring Devices 300W Lamp Dimming Control Plug-In Module

Model:
RFLDM

Description:
Aspire RF Wireless Plug-In Module 15A, 120V/AC grounding receptacle for use with a wide variety of lamps and appliances. Module can be controlled remotely by other RF devices through association of up to 5 devices.

Model:
EZmotion

Model:
45604 - ZRP110

Description:
Outdoor Lights or Small Appliances
Control On/Off function.
Outdoor Lights
• Ideal for outdoor seasonal lights

Small Appliances
• Pond pump
• Bug zapper

Includes one Z-Wave enabled outlet with weather-resistant housing and protective outlet cover.

Model:
45609

Model:
45602 - ZDP100

Description:
300W Plug-in Lamps
Control and dim standard incandescent table and floor lamps.

Model:
45602 - ZDP100

Description:
For use with standard incandescent lighting only
• Wirelessly control on/off and dim functions of table and
  floor lamps
• Module provides one Z-Wave AC outlet and one
  standard AC outlet
• Horizontal design doesn't block additional receptacle
  outlet
Not for use with fluorescent lights or motors

Model:
45603 - ZRP100

Description:
Plug-in Lights and Small Appliances
Control On/Off functions for:
• Incandescent lamps
• Fluorescent lamps
• Small appliances such as fans and pumps

Model:
45613

Description:
Control and dim lights with two or more switch locations:
• Stairs
• Rooms with two entry points

Model:
45603 - ZRP100

Description:
Plug-in Lights and Small Appliances
Control On/Off functions for:
• Incandescent lamps
• Fluorescent lamps
• Small appliances such as fans and pumps

Controls loads up to 600W.

Model:
45605 - ZRR150

Description:
Control On/Off function for any light, fan or appliance you plug into the outlet.

Easily replaces electrical outlet, uses existing wiring.

For plug-in items up to 15A.

One outlet controlled, one pass-through.

Model:
45606 - ZDW120

Description:
Control and dim light.In-wall dimmer; 500W (2-wire)

Model:
45607 - ZDW103

Model:
ZW3003

Description:
The GE 3-Way Dimmer Kit enables wireless control of on/off and dim functions of hard-wired incandescent lighting, and includes a primary dimmer switch and auxiliary switch for control of one light from two locations. The dimmer switches replace your current light switches, use your existing wiring, and provide Z-Wave wireless and manual control of overhead lighting. The primary dimmer switch includes an LED indicator light to easily locate the switch in a dark room. The kit is the ideal setup for lighting stairs, halls, and multi-entrance rooms.

Model:
ZW4001

Description:
The GE Z-Wave 3-Way On/Off Kit enables wireless control of on/off functions of hard-wired incandescent, LED, xenon, halogen and fluorescent lighting. The kit includes a primary switch and auxiliary switch for control of one light from two locations. The primary switch includes a blue LED indicator light to easily locate the switch in a dark room. The kit is the ideal setup for lighting stairs, halls and multi-entrance rooms. It features a gloss white finish that matches modern wall plates.

Model:
HRAM1

Description:
Control electrical appliances and compact fluorescent bulbs using your web browser*, cell phone** or Z-Wave remote control
• 2-way feedback confirms devices are set up and
  working properly - Manual override function
• Each appliance module functions as a repeater to
  extend the range of your home control wireless network
• Use with radios, television, lights and other electrical
  appliances

Model:
HRLM2

Description:
Plug-in Lights and Small Appliances
Control On/Off functions for:
• Incandescent lamps
• Fluorescent lamps
• Small appliances such as fans and pumps

Controls loads up to 600W

Model:
HRLM1

Description:
Plug-in Lamps
Control and dim standard incandescent table and floor lamps.

Model:
HM-AM001

Description:
Control all the appliances you want by adding more Appliance Modules to your Homemanageables Starter Kit. Forgot to turn off the radio when you left the house this morning? Need to turn on the fan before you come home so it's cool when you get there? Want to control compact fluorescent lights? Not a problem with the Homemanageables Appliance Module. Using your internet connected cell phone, iPhone, PDA, computer or even a land line, you can control any of these items (and many more!) in your home or office, anytime. Plus, by doing so, you'll be saving energy and money.

Features
ON/OFF control for attached appliance or lamp
Manual override button
LED shows that module is working

Model:
HM-LM001

Description:
Expand your Homemanageables Starter Kit with additional lighting modules. Control all the plug-in lights throughout your home for complete control no matter where you are or what time it is. Plus, you'll save money and energy by being able to turn lights off when you don't need them on. The Homemanageables lighting module is dimmable, too. Create pre-programmed lighting scenarios for movie watching, bedtime, reading and more.

Features
ON/OFF control of attached lamp
Dim attached lamp
Manual override button
LED shows that module is working

Model:
CA3500

Description:
Use this Z-Wave Split Receptacle to control appliances, fluorescent lights, or other non-dimmable devices on your Z-Wave network. The top outlet is controlled by your Z-Wave network, and the bottom outlet is always on. You also have local control over the device plugged into the top outlet; when you turn the device off and back on using the power switch on the device, the Z-Wave Split Receptacle senses the load and allows the device to power up. This receptacle requires "hot" and "neutral wires plus ground.

Model:
CA600

Description:
In-wall dimmer, 600W Multiple On/Off location dimming when used with wireless accessory controls.
• Multiple location On/Off control using conventional 3-way or 4-
  way wiring and devices.
• Lights fade up or down when turned on or off.
• Automatically returns to last level in the event of power
  fluctuations.
• Light levels can be set by pressing and holding the rocker until
  the desired light level is reached.
• Mini-scenes allows local control of connected load plus up to 5
  additional Z-wave devices.
• Full 230 device scene control when used with Intermatic
  InTouch™ (CA5500B) server .
• Dimmer always operates local load, does not require central
  control system.

Model:
HA01

Model:
HA02

Model:
HA03

Product:
Intermatic Plug-in outdoor lighting module; switch; 15A

Model:
HA04

Model:
HA05

Model:
HA06

Model:
HA14C

Description:
The HomeSettings In-Wall Switch Dimmer allows remote control of ON/OFF and DIM functionality for 3-Way switch applications.

Features
• Replaces existing wall switch for single pole and three-way
  applications
• Rocker style uses decorative wall plate (not included)
• Use with remote control or as standard dimmer
• ON/OFF and DIM settings

Model:
HA14WD

Description:
The Wayne-Dalton HomeSettings Z-Wave In-Wall 600 Watt Dimmer Switch

Compatible with the complete range of Z-Wave™ enabled HomeSettings products as well as other Z-Wave™ enabled controllers, regardless of brand. Use it to replace existing single pole or 3-way switches throughout your home and gain remote control of these switches. The HA-14WD can be used with incandescent bulbs and sends ON, OFF and DIM commands. The HA-14WD allows both manual and remote control of the switch. Two-way feed back confirms devices are working properly.

Model:
HA18C

Description:
The HomeSettings HA18 In-Wall Switch allows remote control of ON/OFF functionality for 3-Way switch applications. Perfect for applications that do not need dimming capabiltiies, such as flourescent lighting.

Features
Replaces existing wall switch for single pole and three-way applications
Use with remote control or as standard switch
Fits decorator plates (not included)
Use with fluorescent and compact fluorescent lighting

Model:
HA18

Description:
The HomeSettings Z-Wave In-Wall 15 Amp Switch is compatible with the complete range of Z-Wave™ enabled HomeSettings products as well as other Z-Wave™ enabled controllers, regardless of brand. Use it to replace existing 3-way switches throughout your home and gain remote control of these switches. The HA18 can be used with incandescent, halogen and fluorescent bulbs, sends ON and OFF commands and is perfect for locations that don't require dimming. The HA-18WD allows both manual and remote control of the switch. Two-way feed back confirms devices are working properly.

Model:
HA20

Description:
The HomeSettings Z-Wave 3-Way Toggle-Style Dimmer-Switch is compatible with the complete range of Z-Wave™ enabled HomeSettings products as well as other Z-Wave™ enabled controllers, regardless of brand. Use it to replace existing 3-way switches throughout your home and gain remote control of these switches. The HA20 can be used with incandescent and halogen bulbs and sends ON, OFF and DIM commands. The HA20 allows both manual and remote control of the switch. Two-way feed back confirms devices are working properly.

Model:
RZC0P-1LW

Description:
ASCII to Z-wave interface 120VAC, 60Hz. Color- White

Model:
RZI06-1LX

Description:
For single-pole, 3-way or more applications, with LED locator and brightness display. White face assembled on device, ivory and almond faces included.

Model:
RZP03-1LW

Model:
RZP15-1LW

Model:
RZS15-1LX

Description:
For single pole, 3-way or more applications with LED locator. White face assembled on device, ivory and almond faces included.

Model:
VRE06

Description:
For single pole, 3-way or more applications, with LED locator and brightness display. White face assembled on device, ivory and light almond faces included.

Model:
VRF01

Description:
For single pole, 3-way or more applications, with LED locator and fan speed display. White face assembled on device, ivory and light almond faces included.

Model:
VRI06

Description:
For single pole, 3-way or more applications, with LED locator and brightness display. White face assembled on device, ivory and almond faces included.

Model:
VRI10

Description:
For single pole, 3-way or more applications, with LED locator and brightness display. White face assembled on device, ivory and light almond faces included.

Model:
VRM10

Description:
For single pole, 3-way or more applications, with LED locator and brightness display. White face assembled on device, ivory and almond faces included.

Model:
VRP03

Model:
VRP15

Model:
VRS05

Description:
For single pole, 3-way or more applications, with LED locator. White face assembled on device, ivory and light almond faces included.

Model:
VRS15

Description:
For single pole, 3-way or more applications, with LED locator. White face assembled on device, ivory and light almond faces included.

Model:
ML IWD600S

Description:
• Single Button press for pairing into the Monster
  ControlNet™ with MCC AVL50 and MCC AVL300.
• Simple two wire plus ground for most older and newer
  residences.
• No messy wire design allows quick and easy insert of
  existing electrical lines.
• Controls up to 600 watts of incandescent and dimmable
  halogen loads.
• Replaces standard single gang in wall
  dimmers/switches.

Model:
ML IWS1000S

Description:
• Powerful on-board memory stores home lighting scenes
  and light identification.
• Single Button press for pairing into the Monster
  ControlNet™ with ML AVL50 and MCC AVL300.
• Simple two wire plus ground for most older and newer
  residences.
• No messy wire design allows quick and easy insert of
  existing electrical lines.
• Controls up to 1000 watts of florescent and other
  electrical loads.

Model:
ML LAS1000

Description:
• On-board memory eliminates need for external lighting
  control box and dependency on Monster Central
  Controller.
• Powerful on-board memory stores home lighting scenes
  and light Identification.
• Single Button press for pairing into the Monster
  ControlNet™ with MCC AVL50 and MCC AVL300.
• Green/amber LED Button status indicator.
• On/Off lighting scene and appliance control through
  Monster Central Controllers.

Model:
ML LD300

Description:
• On-board memory eliminates need for external lighting
  control box and dependency on Monster Central
  Controller.
• Powerful on-board memory stores home lighting scenes
  and light Identification.
• Handles up to 300 watt incandescent/dimmable halogen
  loads.
• Single Button press for pairing into the Monster
  ControlNet™ with MCC AVL50 and MCC AVL300.
• Green/amber LED button status indicator.

Model:
HA-02WD

Description:
• Controls appliances up to 15 Amps and lighting (including
  compact fluorescent bulbs)
• Heavy-duty 3 prong plug and receptacle
• Manual override
• LED shows feedback from controller during setup and that
 the controlled device is working

Model:
HA-03WD

Description:
• Controls ON/OFF/DIM for incandescent and halogen lamps
• Manual override
• LED shows feedback from controller during setup and that
 the controlled device is working

Model:
HA-04WD

Description:
• Controls ON/OFF outdoor devices
• Weather resistant and waterproof
• For indoor and outdoor use in dry, damp and wet locations
  6 inch cord
• Manual override
• LED shows feedback from controller during setup and that
 the controlled device is working

Model:
HA-06WD

Description:
• Controls rocker style uses decora wall plate (not included)
• Manual override
• LED shows feedback from controller during setup and that
 the controlled device is working

Model:
WD-HA20

Description:
• Control and dim lights.
• Easily replaces existing in-wall hard-wired switches.
• Can be used in pairs (2 required) for 3-way switch
  locations.