| Express Controls |
Product:
Express Controls Motion Sensor
Model:
EZMotion-EU
Description:
This motion detector (PIR = passive infrared receiver) detects the presence of a person in a room. Additionally the actual temperature and the amount of light in this room is detected and made available via Z-Wave. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this unit. The sensor is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered. The device is configurable in terms of motion detection angle and sensitivity or the time-out when the detection will fall back to a no-motion state. Sensitivity can be set from “pet-save” via normal up to “presence” where even a not-moving person in a room is detected by its breathing. The device needs to be included into a Z-Wave network by a remote control or any other Z-Wave controller. For configuration of certain behaviour a static controller such as a PC with home automation software or a gateway is recommended.
|
Manufacturer's Product Info |
| Everspring |
Product:
Everspring Z-Wave Smoke Sensor
Model:
SF812
Description:
• Photoelectric sensor particularly effective detecting
smoldering fires
• Built-in 85dB sounder and flashing red LED will indicate presence of smoke
• Manual test button help to verify battery status and alarm operation
• Low battery and sensitivity detection
• Tamper proof protection
|
Manufacturer's Product Info |
| |
Product:
Everspring Z-Wave Temperature and Humidity Sensor
Model:
ST814
Description:
• Max. & Min. Ranger Hold
• Digital TN LED Display
• LED Backlight
• Built in Beep Tone
• 0°C freeze indication
• Design for table placing/wall mounting
• 3 x 1.5V AA type battery operation
|
Manufacturer's Product Info |
| |
Product:
Everspring Z-Wave Indoor Siren
Model:
SE812
Description:
• Built-in 85dB sounder and flashing red LED will indicate presence of trigger
• Low battery LED indication
|
Manufacturer's Product Info |
| |
Product:
Everspring Z-Wave PIR Movement Sensor
Model:
SP103-EU
Description:
• Detection Range: 100? x 10M
• Low battery LED indication
• Tamper proof protection
• Operate by 3*1.5V AA type battery pack
• Protection degree IP44, Indoor / Outdoor use
|
Manufacturer's Product Info |
| |
Product:
Everspring Z-Wave Door/Window Detector
Model:
SM103-EU
Description:
• Tamperproof protection
• Protection degree IP44, Indoor / Outdoor use
|
Manufacturer's Product Info |
| LS Control |
Product:
LS Control Setpoint Sensor
Model:
ES861C Setpoint Sensor
Description:
ES 861 is a wireless battery-operated nomination button. When the knob sends a value as a function of the setting. ES 861 is designed for installation in low-energy installation systems that are based on Z-Wave.
Z-Wave is a standard that brings together communications between electronic devices in order to achieve an optimal system to control comfort and energy consumption in buildings with intelligent installations. Z-Wave is based on a central server that has the overall control function. When the button on the ES 861 is operated, it sends a signal to the center, which notifies you on to the unit to be adjusted. It is almost only your imagination limits the possible applications. But here is a list of those who just dropped us into:
Setting ventilation mind blowing 0-100%
Setting the ventilation exhaust
Setting the limit of maximum benefit
Control of light 0-100%
Overloading automatically regulated light
Setting temperatursetpunkt or other set points
|
Manufacturer's Product Info |
